The Wireless Emergency Lighting System
Time:2020-03-13
The wireless emergency system is developed based on the Zigbee wireless networking technology,which realizes the functions of management,analysis,alarm feedback and other functions of the PC terminal for each emergency subsystem.

The wireless emergency system is developed based on the Zigbee wireless networking technology,which realizes the functions of management,analysis,alarm feedback and other functions of the PC terminal for each emergency subsystem.The first generation of products realizes the LAN connection management of PC terminals and subsystems,the later products are upgraded to the Internet version, and the corresponding database is established to realize the big data analysis of the system.


- Normal function display

- Abnormal status display

- Insufficient battery capacity Battery

- Battery fail

- Charge and discharge management failure system (Over-charge. Over-discharge etc.)

- LED load failure (Open circuit,Short circuit,etc.)

- Prompt of battery's remaining emergency response time

- Prompt of battery's remaining life

- Function test: By setting the time on when it enters the Function test on interface.

  the Function test can be started at any time.

- Duration time test: By setting the time on when it enters the Duratin time test on interface,

  the Duration time test can be started at any time.

- Reset mode: During the Emergency mode,the all emergency lights could be turned on/off

  by the PC terminal.